Other Safety Seals Made in Advance

Other Safety Seals Made in Advance

In this category there are labels using other techniques of securing than a metallic surface with burnt holographic pattern. Self-adhesive pasters are generally made of special vinyl film with very low tensile firmness. Adding a quality adhesive basis of a paster it is practically impossible to unstick the paster from the surface without damaging – it always gets broken gradually. Using these seals is oriented to different purposes then holographic seals. They are normally used in connection with final customer (e.g. seal stuck onto screws of repaired electronic devices or any other household appliances) when the eventuality of seal falsification is practically impossible from the customer’s side. In addition, film seals can be stuck onto much bigger holes around screws on above mentioned appliances or directly onto their tops and that is not possible with a film containing metallic layer.


Mirror adhesive sheet with VOID layer for laser printing

Silver adhesive foil size 11.81x6.3inch to be printed on a laser printer. It is a material that allows fast and cheap creation of custom security labels according to your current requirements. The entire surface of the sheet acts as a tamper evident foil - when you try to peel it off its aluminum mirror layer tears to reveal the word "VOID", repeating in a regular grid. Part of the aluminum film remains on supporting transparent foil stickers and a second part firmly attached to the specific subject. Look at photo demonstrating peel off foil paper.To create your own safety stickers simply print required texts or images on film and then cutting the labels according to required size.When printing laser printer toner is completely fused to the surface of the film.Once applied image on stickers should not be removed as re application or removing will show clear signs of tampering. In this parameter, laser printing surpasses the sieve printing method used in printing holograms. With color printers you can create naturally colored safety labels and also full-color photos, which is also beyond the scope of sieve printing in industrial holograms mass-production.

Advantages of custom printed security labels:
  • Production rate
  • Low cost from one piece
  • The ability to print in full color
  • The ability to print photos
  • Easy numbering stickers
  • Dimensions always according to your requirement
  • Dimensions of the single labels up to 11.81x6.3inch
  • VOID layer - destructive aluminum film
  • High resolution printing (depending on printer resolution)
  • Disadvantages:
  • Safety in high risky applications in terms of falsification inappropriate; should consider deploying hologram.

  • Price for 1-50 pieces:   $1.22  without TAX

    Price for 51 and more pieces:   $1  without TAX


       
        

    Safety Numbered Label with a Column for Signature

    Self-adhesive paper label is mostly aimed to secure documents. Empty space with guilloche ornaments in the background represent a column for hand written notes such as signature, date or initials. Combination of a few guilloche patterns creates safety ornaments preventing from falsification. Incrementive number chain is used in a format that allows to produce up to 26 million of these self-adhesive pasters with a unique alphanumerical identification. When applying to paper, safety label is asolutely impossible to rip off the document without damaging and that is also thanks to a chosen material of which this label is made – paper. Outstanding colour realization is suitable for visible labeling of documents that can be seen from a longer distance.

    Surface of this label is semimat, alphanumerical inentificators from „A000000“ to „Z999999“ are printed in shiny black and letters’ height is 0.157in. In central circular guilloche patter you can find the title „Protected“. Parameters of the column for writing notes with ball.pen are 0.984 x 0.315in. Parameters of the whole safety self-adhesive label are 2.362 x 0.709in. Labels are distributed in a roll, placed above each other as you can see in the picture.

    Parameters 2.362 x 0.709in


    Price for 1-99 pieces:  $0.1 without TAX

    Price for 100 - 999 pieces:  $0.09 without TAX

    Price for 1000 and more pieces:  $0.07 without TAX


       
        

    Tamper Evident Clean Removal Non-Residue Security Protection Labels


    We offers a high performance durable polyester label / seal that detects tampering without leaving any type of adhesive residue on the surface where is applied. This particular seal protects intruders from valuables or access to high priced or delicate items, confidential information or cabinets. The tamper indicating provide a "VOID" message just on the seal but not in the surface when removal is attempted; you'll instantly know if someone peeled this security seal off. Labels are available in red and blue color.

    The patented adhesive is designed to use it to hold screen protector covers from new electronic screen devices like monitors, TV's and Cell Phone Screens, ensure new cell phone batteries before are used, hospital medicine cabinet access, police department evidence room and file control, cashier drawer access, etc…

    Our non-residue tamper evident security feature works immediately on most porous and non-porous surfaces after applied. This laboratory-engineered label can be applied on: Glass, Aluminum, Stainless Steel, powder coated metal, most plastics, paper, wood, printed circuits, etc…


    • Non Residue Tamper Evident
    • Custom printable
    • Cannot be resealed
    • Self Voiding
    • Outstanding performance

    Label features:
    • Permanent pen ink hand writable
    • Can be numbered and/or personalized
    • Can be fold in two side product without delaminating
    • Applies in seconds, impossible to tamper or modify
    • Adheres immediately over almost any surface
    • High quality, durable and strong material
    • "VOID" pattern when removed
    • Dimensions 2.36 x 0.79in
    • Service temperature -65 Deg F. to +180 Deg F

    Price for 1-100 pieces:  $0.12 without TAX

    Price for 101 - 1000 pieces:  $0.09 without TAX

    Price for 1001 and more pieces:  $0.06 without TAX


       
        




    QC PASS Vinyl Self-adhesive Paster 0.276in

    Circular white paster Quality Control Passed for labeling passing the outgoing control of quality and function. Every product that has passed the test is therefore labeled with a label showing its quality. Circular self-adhesive pasters with a black title QC PASS.

    The seal of outgoing control has a shiny surface and a diameter of 0.276in.


    Price for 1 piece:   $0.03 without TAX


       
        

    Vinyl VOID Self-adhesive Paster – a black „screw“

    Circular paster with a white title VOID is aimed mostly to protect screws from unauthorized deinstallation for service, cautionary and advertisement usage. The same cautionary seal is also used by prestigious mobile phones producers. Higlhy adhesive acrylic glue keeps the cautionary seal reliably stuck on the tops of set-in screws. The seal gets ragged when trying to unstick.

    This seal with a dark background has a diameter of 0.118in.


    Price for 1-99 pieces:  $0.03 without TAX

    Price for 100-999 pieces:  $0.02 without TAX

    Price for 1000 and more pieces:  $0.01 without TAX


       
        

    Vinyl VOID Self-adhesive Paster – a white „screw“

    Circular paster with a white background and a red VOID title is aimed mostly to protect screws from unauthorized deinstallation for service, cautionary and advertisement usage. The same cautionary seal is also used by prestigious mobile phones producers. Higlhy adhesive acrylic glue keeps the cautionary seal reliably stuck on the tops of set-in screws. The seal gets ragged when trying to unstick.

    This seal has a diameter of 0.118in.


    Price for 1-99 pieces:  $0.03 without TAX

    Price for 100 - 999 pieces:  $0.02 without TAX

    Price for 1000 and more pieces:  $0.01 without TAX


       
        

    Self-adhesive Pasters for Detection and Indication of Humidity Type 2

    Plastic rectangular self-adhesive paster reacts to soaking or moisturizing by changing of its colour to red. Drying of this wet label will not change its look and it stays as an obvious detector of intervening of a critical part with water. The whole basal part of this paster is impregnated by a red colour and covered by a white uper part. When this seal gets into contact with water or excessive air humidity red colour realeases and permeates to upper white layer which it colours. We offer „water“ self-adhesive pasters with red printed signs just as with the white ones, the principle and also basal predesign red layer is the same.

    Parameters 0.236 x 0.157in


    Price for 1 piece:   $0.06 without TAX


       
        

    Self-adhesive Pasters for Detection and Indication of Humidity Type 3

    Plastic rectangular self-adhesive paster reacts to soaking or moisturizing by changing of its colour to red. Drying of this wet label will not change its look and it stays as an obvious detector of intervening of a critical part with water. The whole basal part of this paster is impregnated by a red colour and covered by a white uper part. When this seal gets into contact with water or excessive air humidity red colour realeases and permeates to upper white layer which it colours. We offer „water“ self-adhesive pasters with red printed signs just as with the white ones, the principle and also basal predesign red layer is the same.

    Parameters: diameter of 0.177in


    Price for 1 piece:   $0.044 without TAX


       
        

    Self-adhesive Pasters for Detection and Indication of Humidity Type 4

    Plastic rectangular self-adhesive paster reacts to soaking or moisturizing by changing of its colour to red. Drying of this wet label will not change its look and it stays as an obvious detector of intervening of a critical part with water. The whole basal part of this paster is impregnated by a red colour and covered by a white uper part. When this seal gets into contact with water or excessive air humidity red colour realeases and permeates to upper white layer which it colours. We offer „water“ self-adhesive pasters with red printed signs just as with the white ones, the principle and also basal predesign red layer is the same.

    Parameters: diameter of 0.098in


    Price for 1 piece:   $0.04 without TAX


       
        

    Self-adhesive Pasters for Detection and Indication of Humidity Type 5

    The smallest circular self-adhesive paster reacts to soaking or moisturizing by changing of its colour to red. This type of paster does not contain plastic capping film and its surface is paper which increases the sensibility of air humidity detection. Drying of this wet label will not change its look and it stays as an obvious detector of intervening of a critical part with water. The whole basal part of this paster is impregnated by a red colour and covered by a white uper part. When this seal gets into contact with water or excessive air humidity red colour realeases and permeates to upper white layer which it colours. We offer „water“ self-adhesive pasters with red printed signs just as with the white ones, the principle and also basal predesign red layer is the same.

    Parameters: diameter of 0.079in


    Price for 1 piece:   $0.02 without TAX


       
        

    Self-adhesive Pasters for Detection and Indication of Humidity Type 6

    Quadratic self-adhesive paster reacts to soaking or moisturizing by changing of its colour to red. This type of paster does not contain plastic capping film and its surface is paper which increases the sensibility of air humidity detection. Drying of this wet label will not change its look and it stays as an obvious detector of intervening of a critical part with water. The whole basal part of this paster is impregnated by a red colour and covered by a white uper part. When this seal gets into contact with water or excessive air humidity red colour realeases and permeates to upper white layer which it colours. We offer „water“ self-adhesive pasters with red printed signs just as with the white ones, the principle and also basal predesign red layer is the same.

    Parameters 0.236 x 0.236in


    Price for 1 piece:   $0.045 without TAX


       
        

    QC Passed PVC Circular Yellow, Green, Red, White, Orange Self-adhesive Paster

    Circular PVC paster Quality Control Passed for labeling passing the outgoing control of quality and function. Is available in 5 colours. Every product that has passed the test is therefore labeled with a label showing its quality. There are 120 circular self-adhesive pasters with a black title „QC Passed“ on one sheet.

    The seal of outgoing control has a shiny surface and a diameter of 0.394in.


    Price for 1-100 pieces:  $0.06 without TAX

    Price for 100 and more pieces:  $0.03 without TAX


       

    QC Passed Circular Holographic Self-adhesive Paster

    PVC paster with a holographic multilayered fanwise motive and „QC Pass“ labeling. The surface of pasters cut in advance is shiny. QC PASS (Quality Control Passed) labels a product which has fulfilled the requirements of a technical control and passed the outgoing exams.

    The diameter of individual pasters is 0.394in and the height of letters is 2in.


    Price for 1-100 pieces:  $0.07 without TAX

    Price for 100 and more pieces:  $0.04 without TAX


       
        

    QC Passed Oval Holographic Self-adhesive Paster

    PVC paster with a homogenous basis creating a rainbow amoebic efects in depending up to light. There is a black title „QC Passed“ on the holographic basis. The surface of pasters cut in advance is shiny. QC PASS (Quality Control Passed) labels a product which has fulfilled the requirements of a technical control and passed the outgoing exams.

    Parameteres of individual pasters are 0.433 x 0.315in.


    Price for 1-100 pieces:  $0.07 without TAX

    Price for 100 and more pieces:  $0.04 without TAX


       
        

    QC Passed Oval Golden Mat Holographic Self-adhesive Paster

    PVS paster with a golden mat surface and a black title „QC Passed“ and the edge is bordered with a black ellipse. QC PASS (Quality Control Passed) labels a product which has fulfilled the requirements of a technical control and passed the outgoing exams. Golden mat surface looks retiring, this colour is used for luxurious products.

    Parameters of individual pasters are 0.512 x 0.354in.


    Price for 1-100 pieces:  $0.06 without TAX

    Price for 100 and more pieces:  $0.03 without TAX


       
        
    Address and contacts:

    My Holograms, LLC

    12116 SW 110th Street Cir. S

    Miami FL, 33186

    info@hologram-production.org

    Cell:  305 - 301 3293

    Opening time:

    Mo-Fr‚ 8:00 - 18:00