Two-layered Numbered Holograms on Stock

Two-layered Numbered Holograms on Stock

Two-layered universal self-adhesive labels are equipped with a unique series number. The falsification of two layered graphical hologram blueprints is quite complicated and therefore its level of security is higher. These numbered labels are always kept on stock. Thanks to the unique numeric number of each hologram its security level highly increases. It is important to notice, no other seal with the same numeric number is manufactured ever again. For low production cost you get security hologram item that reaches levels of any security custom made holograms sold in series.


Two-layered Numbered Sticker with Screen Printing on VOID Basis

In-store holographic sticker with dimensions of 2.756 x 0.866in with rounded corners combines a few security features such as two holographic layers, numbering, screen printing and VOID basis. Thanks to the unique number of each hologram its security level highly increases since there is on other sticker sold with the same serial number ever. The VOID basic layer that is used - “Void evident film“ shows increased sensitivity to the attempts of unauthorized removal and resolves in a specific damage of the metallic layer – exposing the square raster of 0.118 x 0.118in. In one holographic layer there are two graphic emblems in a circle and series number around the border and in the second holographic layer there is a repeating word “SEAL“in two sizes underneath each other on the raster. The main color of this hologram is silver. There is a screen printed sign of red ribbons seal on the top.


Second picture illustrates what happens when the hologram is removed. You can see intact hologram paste to the surface at the top picture. Then you can see two separated parts which are separated when the label is removed – the basal part remains paste to the surface and the top part with the film has evident signs of removal even though it doesn’t lose its adhesive attributes and can be paste to another object. This attribute can be used when labeling the end of validity, marking sale voucher, etc.


Dimensions of this seal are 2.756 x 0.866in. These holographic labels with series number are available on stock at all times and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  $0.23 without TAX

Price for 100 and more pieces:  $0.17 without TAX


   
    

A two – Layered Numbered Sticker with a VOID Layer and a High Level of Adhesiveness

This two-layered destructive holographic sticker has an increased security against falsification thanks to a guilloche pattern in one of the holo layers. The second improvement is provided by a three-layered glue that highly increases the adhesiveness and it is possible to use it on rough surfaces where the standard thickness of the glue is not able to secure the continual adhesiveness of the sticker.

The adhesiveness is demonstrated on a sporadically structured plastic surface. You can see a comparison with a made in advance single-layered security seal which also obtains a VOID layer but has a standard thickness of glue. At the top you can see an attempt of removing and re-pasting, at the bottom you can see the remnants after removing the hologram.

Every one of these holographic stickers has its own unique series number that will never repeat itself in any other order and there are no stickers with the same series number. For securing even higher security the hologram is produced on a VOID basis, meaning on a special film that increases the sensitivity against the removing attempts, removing and re-pasting the sticker on a different product. This self-adhesive media is made so that it is clearly visible when someone tries to remove it. When trying to remove the sticker it gets visibly damaged. After removing the sticker it leaves a clearly readable text „VOID“on both the surface of a film and also the place it was paste to. The sticker contains security words “PROTECTIVE LABEL” which increases its flexibility of applications and usage.

Apart from the above mentioned words this label also contains a seven-figured identification number. In the basis layer there is a guilloche which has two functions – increasing the security against falsification and having also the decorative function it multiplies the rainbow holographic effects when the seal is exposed to light. The removing and re-pasting of a sticker is disabled by a VOID production technology and supported by a stronger layer of glue. When removed, the label gets damaged and „VOID“text is revealed as you can see in the picture.

The size of this seal is 2.756 x 0.866in, the corners are round. These numbered VOID stickers are available in our store all the time and you can order them anytime in the minimum of 1 piece and up.


Price for 1-100 pieces:  $0.14 without TAX

Price for 100 and more pieces:  $0.12 without TAX


   
    

Two-layered Numbered Sticker with a VOID Layer for Social Occasions

This two-layered numbered holographic sticker is reliable and neat way of securing the entry tickets from falsification. Motive of a dancing couple predestinates the hologram application for the entrance tickets to social occasions, especially those taking place in a gala season. The entrance tickets to the gala/event events organized by various voluntary organizations, schools, etc. are typically printed by normally available laser printers and many times lack the basic security items. If you take into consideration the number of participants, security and the safety of the events preventing any falsification becomes quite important.

By simply pasting this type of a hologram onto the ticket printed on a normal laser printer you increase the level of the security of the entrance ticket to its minimal sufficiency. The importance of this security results from the unique number code of each sticker and is used as identification when the uncertainties occur because of the number given to each ticket.

Hologram for securing the event/gala tickets, seat reservation tickets and vouchers is thematically equipped in one layer by a motive of a dancing couple with a decorative guilloche. In the second layer there is a periodically repeated base made of words „ORIGINAL“of two different sizes. The consecutive serial 5-digit numbering is printed on the left side of a dancing couple in the middle of the guilloche.

The VOID basic layer „Tamper Evident Film“ used shows an increased sensitivity to the attempts of unauthorized removal and reacts by a specific bearing metallic layer damaging – revealing the word VOID. You can see the illustration of a division of the silver layer in the photograph. The text made of VOID words is revealed in the area where the sticker was pasted to and the rest of the silver area stays alone on the sticker (shown on the right side of the picture).

The diameter of this hologram is 0.51in. These holographic certificates (labels) are available in our store all the time and you can order them anytime in the minimum of 1 piece and up.


Price for 1-100 pieces:  $0.12 without TAX

Price for 100 and more pieces:  $0.09 without TAX


   
    

Two-layered numbered VIP Hologram security sticker


Security hologram " Very Important Person ", is intended mainly for VIP tickets and invitations for important people and important guests , has unusual shape with 13 corners for maximum visual emphasis. Stickers are available on silver and gold film in a double row of numbers. Silver have five-digit numbers with prefix " A" and the gold of the prefix "B". Baseline use of this sticker is based on the same philosophy as that described in the seal for social occasions with an emphasis on the possibility distinguish it from the standard service offers. We recommend The holograms for all section in the relationship with VIP such as , VIP Zone , VIP , VIP client but also the phrase as GOLD member , GOLD zone or PLATINUM zone PLATINUM client , PLATINUM member or in connection with words or PREMIER EXCLUSIVE.

Both versions of stickers have the same format ,in the rectangle of size 0.75x0.71in. The letters used to write the word "VIP" have a height of 0.16in. In background of the hologram is a grid of regular hexagons with the letters " V ", " I ", " P ".

This holographic stickers are always available and you can always order from one piece.


Price for 1-100 pieces:  $0.17 without TAX

Price for 101 and more pieces:  $0.14 without TAX

Price for 501 and more pieces:  $0.12 without TAX


   
    


Small Circular Holographic Sticker with „Original“

This small circular holographic sticker has a unique series number and do not repeat in any other order; there are no stickers with the same series number. Self-adhesive sticker contains title “SECURITY PROTECTION“and a basal holo layer raster is from the word „Original“. Circular seal has 3 holographic layers. The third layer is series number of five.


Dimensions of the sticker are given by a diameter of a 0.394in circle. These holographic stickers with series number are available on stock at all times and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  $0.12 without TAX

Price for 100 and more pieces:  $0.09 without TAX


   
    

Large Circular Numbered Holographic Sticker with „Original“

Each holographic sticker has a unique series number which do not repeat in any other order, there are no stickers with the same series number. Self-adhesive label contains title „SECURITY PROTECTION” and a basal holo layer raster is from the word “Original“. Circular seal has 3 holographic layers. The third layer is series number of five.


Dimensions of the sticker are given by a diameter of a 0.787in circle. These holographic stickers with series number are available on stock at all times and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  $0.14 without TAX

Price for 100 and more pieces:  $0.12 without TAX


   
    

Small Square Numbered Holographic sticker with „Original“

Each holographic sticker has a unique series number which do not repeat in any other order, there are no stickers with the same series number. Self-adhesive sticker contains title „SECURITY PROTECTION” and a basal holo layer raster is from the word “Original“. Square seal has 3 holographic layers. The third layer is series number of five.


Dimensions of the seal are 0.394 x 0.394in. These holographic stickers with series number are available on stock at all times and you can order them in number of 1 or more anytime.


Price for 1-100 pieces:  $0.12 without TAX

Price for 100 and more pieces:  $0.09 without TAX


   
    

Large Square Numbered Holographic Sticker with „Original“

Each holographic sticker has a unique series number which do not repeat in any other order, there are no stickers with the same series number. Self-adhesive label contains title „SECURITY PROTECTION“ and a basal holo layer raster is from the word “Original“. Square seal has 3 holographic layers. The third layer is series number of five.


Dimensions of the sticker are 0.787 x 0.787in. These holographic stickers with series number are available on stock at all times and you can order them in number of 1 or more anytime


Price for 1-100 pieces:  $0.14 without TAX

Price for 100 and more pieces:  $0.12 without TAX


   
    
Address and contacts:

My Holograms, LLC

12116 SW 110th Street Cir. S

Miami FL, 33186

info@hologram-production.org

Cell:  305 - 301 3293

Opening time:

Mo-Fr‚ 8:00 - 18:00